| • | This drive can go backward and forward with one speed. Either you can specify one or two outputs. In addition you can select forward/backward with pulse response. In this case the drive behaves like a 5/2-way valve with pulse response.
|
| • | Bit motor with two speeds
Here you can specify another bit ‘fast’ and corresponding to that another speed.
|
| • | 4/2-way valve
Here you only have to specify a PLC output. If it is specified the drive will go forward, if not the drive will go backward. |
| • | Simple frequency converter
This motor corresponds to a frequency controlled motor or a proportional valve. It has to be connected to a word (E, A-, M- or data-) of the PLC.
Next to the address you have to specify as well at which value of the word the maximum speed shall be reached. If the word in the real PLC has to head for an analog output that shall specify a frequency converter +/- 10V you will have to enter 27648 here. |
| • | Servo drive for linear mover During creating the simulation you specify some positions here which are selected automatically by the PLC by its number and which are approached automatically. You can also specify the set position directly. |
| • | Crank drive here a joint / an axis is used to drive the linear mover like a connecting rod. |
|