Valve

**

A valve limits the flow to a definite value. This value is specified as with the pump by the drive. In reality many valves or shifters are controlled by jet propulsion. Corresponding to that you can select a linear mover as drive (that has to be created before). Depending on the position of the hot spot of the linear mover the valve is opened from 0% to 100%.

You should adjust the nominal diameter of the valve in extended pipe properties corresponding to the actual conditions.

Please note that with the valve type described in place, pneumatic or hydraulic ones, used to the control of drives, are not meant.

See also:

Fluids

Check valve

Pipe

Static elements of simulation

Tabsheet: Fluids